Fits Buick Regal 2011 - 2016. Fits Cadillac Xts 2013 - 2015.
Fits Chevrolet Equinox 2010 - 2016. Fits Chevrolet Impala 2014 - 2016.
Fits Chevrolet Malibu 2013 - 2015. Fits Gmc Terrain 2010 - 2017. Fits Saab 9-5 2010 - 2011. 2 Pcs wheel hub bearing.
Remove the bolt (1) and separate the front wheel sensor from the steering knuckle. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove cotter pin and the nut retainer, Loosen the wheel hub lock nut from the drive shaft using power tool. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
Remove the engine side cover. Remove the lower nut and bolt from the steering knuckle, Separate transverse link from steering knuckle. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
Remove the wheel hub and bearing bolts using power tool. Remove the splash guard and the wheel hub and bearing from the steering knuckle.Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor. Pull out the front wheel sensor, being careful to turn it as little as possible. Do not pull on wheel sensorharness. Inspection after removel : Check components for deformation. And boots of transverse link ball joint for cracks.
Axial end play, and swing torque. Installation is in the reverse order of the removal. Do not reuse the wheel stud. Do not reuse the cotter pin. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing. Driver Side or Passenger Side Front. For Buick Chevrolet Cadillac Gmc. Has ABS with Tone Ring Sensor.
13502785, 13502886, 13504972, 13589507, 22859843, 7467839. Front Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121 5 Lug. 2x For 1999 2000 2001 2002 2003 2004 2005 2006 2007 Ford F150 Remote Car Key Fob. For 1988-98 Chevy GMC 1500/2500/3500 Towing Manual Side View Mirrors Truck Pair.
Wheel Bearings For Chevy Impala Pontiac Grand Prix Buick Regal Bearing 2 Front. Cab Marker Roof Running Light. For Yamaha YFZ450 YFZ 450 04 05 Rear ATV wheel drive Racing Wheel Axle Axl shaft.
ECCPP Big Mirror Plate Heated LH Side Fits 2002-18 International Prostar. ECCPP Exterior Door Handle Front Passenger RH Right for 88-96 Buick Regal 2 Door. The item "Front Or Rear Wheel Bearings Pair For Chevy Equinox Buick Regal Gmc Terrain Cts" is in sale since Wednesday, August 22, 2018.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Wheels, Tires & Parts\Wheel Hubs & Bearings". The seller is "eccppautoparts" and is located in Ontario, California.
This item can be shipped worldwide.