Placement on Vehicle:Driver Side or Passenger Side FRONT and REAR. For MINI COOPER 2002 - 2006. When do you need to replace.
4x Front Rear Wheel Hub Bearing Assembly For 2002-06 Mini Cooper 1.6L 513226. Placement on Vehicle:Driver Side or Passenger Side. Poor Clicking, snapping or popping. Shimmy, shudder, or vibration at constant speeds. Abnormal side pulling when applying brakes.Uneven or abnormal tire wear. Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand.
Remove the lug nuts and wheel. Locate the caliper bolts and remove them with the ratchet and a socket.
Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. Remove the spindle nut with the breaking bar and a spindle nut socket.
Remove the washer behind the spindle nut. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. Install the slide hammer onto the lug studs and secure with tightened lug nuts. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket. Replace the brakes in the same manner you extracted them. The tire and lug nuts, and tighten the lug nuts as tight as you can get them. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution. Wheel Hub & Bearing Assembly. Are always here to answer the question and solve the problem.
Please DO check the compatible chart before placing orders to make sure it fits your vehicle. 4 pcs Wheel hub Bearing. 2 pcs 1/2 5x4.75 studs Wheel Spacers For Chevrolet Corvette For Cadillac XLR. 1 pc Inside Interior Door Handle RH Right Passenger Side For Ford F-150 2009-14. 4 pcs1.5 8x6.5 to 8x180 8 Lug Wheel Spacers Adapter For CHEVY For GMC. A/C Compressor Clutch For Chevrolet Silverado 2500 HD Tahoe Suburban 1500. 2 Pcs 2 50mm 6x5.5 108mm Wheel Spacers 14x1.5 Studs For GMC C2500 4.3L 5.0L. A/C AC Compressor Clutch Kit For Mazda 3 CX-7. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Wheel Bearings, Hubs & Seals". The seller is "autosuperstar" and is located in this country: US. This item can be shipped to United States.