4 x 2 8x6.5 Hub to 8x170mm Wheel Conversion Adapter Fit Chevrolet 8-Lug Models
2" Thick Conversion Adapter/8x6.5" PCD To 8x170mm PCD/M14x1.5 Thread Pitch. Set of 4 Pcs Adapter + 32 Open Lug Nuts. 6061 T6 Aluminum Spacer/ 10.9 Grade SCM Heat Treated Steel Lug Nuts.
Lug Nut Thread to Hub. 4 Pcs Hub Centric Adapter. 32 Pcs Open-End Lug Nuts. The actual fitment varies based on the requirements of wheels. Lug nuts/bolts seat has to strictly follow the wheel condition.
If you are not sure, please do not hesitate to ask customer service. We strike to provide high quality auto parts. Your satisfaction is our first priority. Should you have any questions, please do not hesitate to contact our customer service for help. In no event shall our company be liable for any direct, indirect, punitive, incidental, special or consequential damages whatsoever arising out of or connected with the use or misuse of any of its products.
Following chart is designated for Thread Pitch check only. Due to aging, your studs may have been changed. How do I know If this product will fit my car? Use compatibility chart to check Make/Model/Year 2. Check wheel hub is factory default 3.
Check The Hub Stud is shorter than Spacer Thickness 4. You Will Need a Set of M14x1.5 Lug Nut to Fit Your Wheel(9/16-18 Lug Nut for Hub is Provided) 5. Check wheel is Not Same Bolt Pattern as Hub(Conversion Adapter Requirement) 6. Check wheel lug hole flange requirement is 0.9 You can also use existing lug Nuts thread/shape as reference.
Why is the product doesn't have enough grab to the wheels? Your Nuts are too short to have enough thread into the hub. You need Extended Type Lug Nuts 2. You need to use Longer Stud to match the Wheel Requirement.
Why is the product too thin that won't hold my wheel? Your wheel requires large flange lug Nuts to hold, for ideal flange size, please refer to your existing lug Nuts Solution: 1. You need large flange lug Nuts 2. You need to use lug Nuts flange adapter to make it fit. Why does the product not fit my wheel cap?Most of the wheel caps have clipers that require lug Nuts to hold, our lug Nuts may not have the same shape to match the clippers Solution: 1. You need to remove your wheel caps.
Why does the product not fit my hub cap? Most of the hub caps are much thicker than the hub without hub cap, it would require more thickness of spacer to fit Solution: 1.You need to remove your hub-caps. Why the wheel were damaged/damaging my car? The thickness of the spacer were exceed the maximum thickness of the fender requirement Solution: 1. You need to remove your Adapters and use original Wheels.
Why is the thread not matching my wheel hub, but my car is listed in the compatibility chart? Wheel hubs are subjected to be replaced due to aging or repair, after that, you may have different thread than factory default Solution: 1. Check the thread from your existing lug Nuts 2.
Any auto-shop would have a tool to measure thread, or you can send us a pic of your existing lug Nut to confirm. Seat type of mating surface is based on the wheels, different wheels have different mating surface requirements. Some stock wheels may require special mating surface assembling. Check the matting surface from your existing lug Nuts and that from your wheels 2. Alloy stock wheels, steel stock wheels, and aftermarket wheels have different mating specification.
Solution: Contact customer service before placing expediate orders. Not receiving my package but tracking says delivered. How do I change address, cancel, or modify my order after I replaced my order? How do I handle wrong item sent, missing piecies, defective item, and arrival damaged? We do appologized for whatever possible mistake and issues that interrupt your valuable time and schedule. Solution: Contact customer service via on-site messages, we will provide with options you choose. What is material made, construction, and durability? The Lug Bolts were made of SCM steel with one-piece construction without sleeve and cap. The Spacers were made of 6061-T6 Aluminum, capable to absorb the driving force. What is tool size for installation? The sokcet tool for installation is 3/4 mm hex wrench for Open-End Lug Nuts. The recommended torque power is 90 ft/lb for Open-End Lugs; and Factory default Torque power for Lugs to Your Wheel. Please do not over-torque, nor under-torque. What is quality of the material, and will the product get rusted?The Adapters were made from 6061-T6 Aluminum; The Lug Nuts were made from SCM Steel that passed 72-hour salt sray test. However, steel is subjected to rust in hash conditions such as heavy deicing salt, acid rain, or chemical interferences Solution: 1.
Use rubber sleeved socket to prevent cracking or denting surface protection layer 2. Apply plastic dip sray help to isolate metal from outside environment interferences. Please give us five-star feedback, if you accept our products and services, thank you very much!